✨New Features & Enhancements
Camera Alignment Alerts (CH1 & CH2)
RoscoLive now detects when either the road-facing (CH1) or driver-facing (CH2) camera becomes misaligned and notifies users proactively.
-
If the driver-facing camera (CH2) shifts out of alignment and no longer captures the driver correctly, RoscoLive triggers a “CH2 Misalignment” alert.
-
If the road-facing camera (CH1) is unable to maintain its calibrated view of the road, a “CH1 Misalignment” alert is generated.
What’s new
-
Automatic monitoring of camera alignment
-
Alerts now appear on the Vehicles page under the Channel Status section.
- Optional Email/SMS notifications when a misalignment occurs
These alerts help users identify when a camera needs adjustment so it can continue capturing accurate video and events without interruption.
Audio Options for Event Alerts
Users now have more control over how in-cab alerts sound. Instead of only using voice prompts or chimes, you can now choose one of three audio options for supported driving events:
-
Voice Prompt – Plays a verbal alert (current behavior)
-
Chime – Plays a simple tone instead of a voice message
-
Disable Audio – No sound; event is logged silently in RoscoLive
This gives more control over alert behavior and helps reduce unnecessary passenger disturbance.
Applies to:
Harsh Braking, Harsh Acceleration, Potential CH2 Obstruction, Seatbelt, Distraction, Tailgating, Headway Monitoring, Max Speed.
Where to configure:
Vehicles ->Profile Settings -> Select Profile -> Edit -> Event Settings
This change also applies to the Power Off event under General Settings.
Partial Video Upload & Resume
RoscoLive now supports partial video availability. If an event video upload is interrupted, the portion that was successfully uploaded will still be viewable in RoscoLive.
What’s new
-
If only part of the video uploads, the clip will appear in RoscoLive with a new status: Partial Video
-
Users can play the uploaded portion in the Event Viewer
-
When connection resumes, the device continues uploading from where it left off
-
Once complete, the partial video is automatically replaced by the full version
Why this matters
Even if connectivity is lost during an event, users still get immediate visibility into critical footage instead of waiting for a full upload or ending up with no video at all.
Default Notification Device/Group Selection - Geotab
You can now choose the devices and groups once, and Geotab will automatically pre-select them for any new Email/SMS notification you enable.
What’s new
-
When you click Edit Selection, choose the devices or groups you want notifications for.
-
After you make your selection, Geotab will remember your choices.
-
The same devices/groups are automatically pre-selected for future notifications — no need to repeat the selection every time.
Benefit
This makes enabling notifications much faster and eliminates repetitive setup steps, especially for fleets managing multiple alerts.
Bulk Camera Pairing for Geotab Users
Geotab customers can now pair RoscoLive cameras to GO devices in bulk, eliminating the need to pair each camera individually.
What’s new
-
Bulk pairing option now available directly on the Camera Admin page
-
Search enhancements allow users to find GO devices using VIN, Driver Name, or existing device info
-
Pairing input fields are now visible on the page (previous pop-up removed), reducing clicks and speeding up setup
-
Security permissions are respected — users only see GO devices they are allowed to access
Benefit
This significantly reduces setup time for fleets with large camera deployments and streamlines the camera-to-GO device pairing workflow.
